Marking for Grinding On the inside, the mark can be brought forward to allow a fillet or a fiberglass tape to adhere to the roughened part of the tube. In the case of this Valiant, the hull was thick enough and a fillet was strong enough. On a thinner transom, a fiberglass tape should be used to increase bonding surface.
An image is worth a thousand words and sending it by E-mail is so easy: send us pictures of the stern of your boat, the cockpit and lazarette area, its steering gear, belowdecks if needed.
We will suggest a model and its installation, and tell you what and where to measure to build a gear that will fit your boat perfectly.
